Depending on how much clearance you have will determine what will work for you. The MORyde Manual Storage Reel # MR77RR is our smallest reel storage we offer, measuring in at 12-3/4" long, 14-15/16" wide, and 13-7/16" tall. view full answer...
If you have a Coleman setup now the Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR82PV that you referenced will easily fit and use same wiring regardless of the thermostat you have. The thermostat that you have is setup for a Coleman setup so that means it has the correct wiring for this Furrion setup.
To add a heat strip you'd just need the part # FR35SR. view full answer...
The correct SumoSprings kit for your 2014 Itasca Sunstar 35F is the part # SSR-180-54-1 for the rear and part # SSF-170-40-2 for the front. view full answer...
You'll want to use a floor jack to get the rear axle off the ground and then use jack stands to support the axle so that you have enough access to install the rear sway bar part # RM-1139-149. The leveler jacks should be relied on as the only way to hold the motorhome off the ground but I would lower them anyway to use as a backup for in case the jack stands fail. Motorhomes are incredibly heavy so getting under one to work on it in any way is dangerous. As many fail safes as you can use... view full answer...
I think you are correct. Although you do not have the model number, knowing that it is the Revolution series is enough to confirm that the replacement is the # LC3725791. Based on your description I agree that a full assembly is the best choice. This will eliminate any guesswork with the replacement parts and keep your stairs safe and functional. view full answer...
It sounds like you just need to reset the zero point. In order to do this you will need to follow the steps I have attached for you below and in the photo. If this does not fix your issue then please just let me know and I will see if we have any other actions for you to preform.
1. Manually run the jacks to level the unit. This is best achieved by placing a level in the center of the unit and leveling it both front to back and then side to side.
2. Once the unit is level, turn off the... view full answer...
I checked with Timbren and for your 2014 Itasca Sunstar 31ke the correct fitting kit is the part # TFFF53B based on the chassis and there aren't any other options that fit. view full answer...